Liquid Silicone Rubber Material for Cold Shrink Cable Accessories

Payment Terms: L/C, T/T
Liquid Silicone Rubber Material for Cold Shrink Cable Accessories

Product Description

Liquid silicone rubber material for cold shrink cable accessories
Basic model: LIM1530-35A/B
Product Description
The product is one kind of 2-part conductive liquid silicone rubber, catalyzed by platinum, mixing ratio of parts A: B=1: 1.
Key Features
Resistivity: <100Ω . Cm
High elongation suitable for making sheet without crack
Low shrinkage, good rebound
Stable resistivity
Suitable for injection molding
At the temperature of 20ºC and in the condition of air-proof, the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature.
Suitable for insulator terminals or connector's stress cone semi-conductor
SQUARE LIM 1530-35AB is available in 20kgs pails or 200kgs drums.
Typical Properties

The product should be closed tightly, protected from light and moisture, the shelf life is 12 months
Condition of production: Curing 10 minutes at 170ºC.
These figures are for reference only, please contact us for detail
Test conditions Properties Test method Unit LIM1530-35A/B
140ºC×10mins First cure Appearance D2204    
Shore A hardness D412 °A 35
Tensile strength D412 MPa 6.5
Elongation at break D624B % 700
Tear strength D412 DIE C KN/m 25
Tensile set   % 6.0
140ºC×2mins Tc90   sec 35~40
110ºC×5mins Tc90   sec 130~140
  Volume resistivity   Ω.cm 40
Post cure
Shore A hardness D2204 °A 40
Tensile strength D412 MPa 6.0
Elongation at break D412 % 650
Tear strength D624B KN/m 20.0
Tensile set D412 DIE C % 4.0
Volume resistivity   Ω.cm 50

Send your message to this supplier

Miss Lisa

Post a Sourcing Request Now